Our current top-5
CDPro2M LF Clock Modified & Controller
Package deal consists of: VAU1255LF21 (clock modified) with clamper, needs +5V and +9V (fast switch off). Display module / CDpro controller ...    More info

Price: €  453,72 excl. VAT
Controller
Display and CDpro controller. Translates data from button PCB or RC5 remote to the CDpro drive. Display indicates relevant data like track ...    More info

Price: €  95,04 excl. VAT
E- choke
The VdV E-choke replaces traditional chokes that generally work quite well, but suffer from serious disadvantages: high weight relat ...    More info

Price: €  57,02 excl. VAT
Filament supply 5A
New: Filament supply V3.0. Has lossless rectification so can be fed with a lower input supply and has less heat generation. Incorporates slo ...    More info

Price: €  86,36 excl. VAT
Filament supply, 2,5A
New: Filament supply V3.0. Has lossless rectification so can be fed with a lower input supply and has less heat generation. Incorporates slo ...    More info

Price: €  65,70 excl. VAT
Filament supply, 1A, low Noise
New: Low noise filament supply V3.0. Has lossless rectification so can be fed with a lower input supply and has less heat generation. Incorp ...    More info

Price: €  69,83 excl. VAT
Heater Supply
This module feeds heaters of indirectly heated tubes. Compact, very low drop, output range from 2.5V to 13V. Max output 1,5Adc.    More info

Price: €  32,23 excl. VAT
Heater Supply Fast switch Off
9V module with fast switch off for application with Philips CDpro.    More info

Price: €  32,23 excl. VAT
MEC-100
MEC-100 is an electronic choke that offers astounding performance at staggering small volume and weight. Applied in power supply filters fro ...    More info

Price: €  28,10 excl. VAT
MEC-50
MEC-50 is an electronic choke that offers astounding performance at staggering small volume and weight. Applied in power supply filters from ...    More info

Price: €  23,97 excl. VAT
Negative bias supply
Designed in co-operation with Menno Vanderveen. Adjusts up to 4 bias currents within 1%, independent of tube age, mains voltage and other po ...    More info

Price: €  156,20 excl. VAT
Remote Volume Control
Designed by Jos van Eijndhoven, the module consists of 2 PCBs, and comes fully stuffed and tested. It is intended for either upgrade of exis ...    More info

Price: €  197,52 excl. VAT
Shunt Regulator
Upgrades power supplies of both analog and digital circuits, mostly found in CD/DVD players, DACs and similar audio equipment. Low noise, wi ...    More info

Price: €  32,77 excl. VAT
VAU1255/LF21 (CDPro2M) & Controller
Package of CD drive and display module / CDpro controller. Accepts input from both buttons as well as RC5 based remotes. Runs at single +5V ...    More info

Price: €  416,53 excl. VAT
XO 2.2
XO2.2 is a low jitter clock upgrade for CD and DVD players. It includes a very low noise power supply. 3 outputs, additional :2 and :4 outpu ...    More info

Price: €  116,81 excl. VAT
XO 3.2
XO3.2 is intended to be used when external DACs are connected. XO3.2 is equal to XO2.2, but contains an additional reclocking circuit for th ...    More info

Price: €  150,42 excl. VAT
XO DAC
External DACs need that same low jitter clock! Industry solutions using off the shelf input receivers do not offer jitter at the levels a se ...    More info

Price: €  197,52 excl. VAT
XO Supply 12V/100mA
XO supply is a seperate power supply for all XO2.2, XO3.2 and XO-DAC. Uses Schottky barier diodes, 4.700uF Panasonic decoupling capacitor an ...    More info

Price: €  74,79 excl. VAT
Welcome to Tentlabs
Home

Find by group
Products
Kits
Modules
DIY Components
Wiring
 
Find by searchterm
 
Links
tentlabs.com